Clear Coat: To satisfy different customers, we have three kinds of quality
with high performance varnish, the economic type, standard type,
high solid content type, and all of them are with high hardness,
high gloss,resistance to alcohol and gasoline. To spray on the 1K
base coat, the clear coat can provide it the protection, durability
and brightness. The crystal shinning and smooth effect can be
obtained after wet spray twice.
| Temperature & Match | Temperature | Clear Coat | Hardener | Thinner |
| ＜15℃ | Economic/Standard/High Solid Type Clear Coat | Economic/Standard/High Solid Type Fast Dry Hardener | Fast Dry Thinner |
| 15-25℃ | Economic/Standard/High Solid Type Clear Coat | Economic/Standard/High Solid Type Standard Hardener | Standard Thinner |
| 25-35℃ | Economic/Standard/High Solid Type Clear Coat | Economic/Standard/High Solid Type Slow Dry Hardener | Slow Dry Thinner |
| Mixing Ratio | | 2 | 1 | 0.2-0.5 |
Spray: Wet spray two to three layers, the flash-off time between
layers is 5-10 minutes.
Applicable period: At 20 ℃ for 2 hours
Drying Time: At 20 ℃, 40 minutes for surface dry, 12 hours for
thorough dry.With 60 ℃ baking, 40 minutes thorough dry.
Polishing: It is recommended to polish after dry overnight.
Packing: 1L*15, 5L*4
Hardener: high quality, anti-yellowish. We have the Economic, Standard and
High Solid content (HS) three types, and Fast Dry,Standard, Slow
Dry three models. It is suitable for the 2K tinters, 2K ready mixed
paint and clear coat.
Thinner: The thinner is s divided into Fast Dry, Standard and Slow Dry
types. It is used in the 2K paint, 1K paint, clear coat, 2K primer,
etc. It has good dissolution and promote bonding effect.
SURFACE PREPARATION:
1. Surface Should Be Clean And Free Of Dust, Grease And Oil.
2. Old Varnish Surfaces Must Be Sanded Using Grit Sandpaper Number
1200, Before Applying The Clear Coat.
Number Of Coats & Thickness: 2-3 Coats, 40-60μm Flash Time: Allow 5-10 Minutes Between Coats
Apply Using a Spray
Gun Nozzle:
1.2-1.4mm (Gravity Spray Gun)
1.3-1.5mm (Suction Spray Gun)
-Spraying Pressure: 3-4 Bar.
-Spraying Viscosity: 13~18s(Ford Cup #4 At 20℃)
-Number Of Coats: 3 Coats Maximum.
Drying Time | Temperature | Dust Free | Tack Free | Complete Dry |
Drying Time | 20℃ | 1h | 2-3 hours | 24h |
Drying Time | 60℃ | 5 minutes | 10 minutes | 60 minutes |
